WEP-2L. User manual
22
•
•
•
•
•
•
5.4.3 The «Scan Environment» submenu
In the
«Scan Environment»
submenu, scanning of the surrounding radio is carried out and detection of
neighboring access points.
After clicking on the «Scan» button, the process will be launched. After the scan is completed, a list of detected
access points and information about them will appear:
Range –
specifies the range of 2.4 GHz or 5 GHz to which the access point was detected;
SSID –
SSID of the detected access point;
Security –
security mode of the detected access point;
MAC –
MAC address of the detected access point;
Channel/Bandwidth
– radio channel on which the detected access point operates;
RSSI
– the level with which the device receives the signal of the detected access point, dBm.
Please note that during the environment scan, the device’s radio interface will be disabled, which will
make it impossible to transfer data to Wi-Fi clients during the scan.
