WOP-12ac. Quick guide
6
•
•
4 WOP-12ac firmware upgrade
For correct operation of WOP-12ac, it is recommended to upgrade the firmware to the latest version.
After obtaining the relevant firmware version, in the
Maintenance
menu, open
Upgrade
tab and perform the
following:
Upload Method
– check
HTTP
;
New Firmware Image
– click
Browse
button and select relevant firmware version in the window that
opens.
Click
Switch
button to switch to an alternative firmware image set in
Secondary
Image
.
To start the upgrade process, click
Upgrade
. The process may take several minutes (its current status will be
shown on the page). The device will be automatically rebooted when the update is completed.
The current firmware version can be viewed in the
Basic Settings
menu. It is indicated in the
Firmware Version
field.
The relevance of the version installed on the device can be clarified on the official website of the
manufacturer in the Download Center section or by contacting the manufacturer directly. Contact
details are given on the last page of this manual.
Do not switch off or reboot the device during the firmware upgrade.
