WOP-12ac. Quick guide
3
•
•
•
•
•
•
•
1 Annotation
This manual specifies the following:
connection to WOP-12ac web interface;
configuration of WOP-12ac network parameters;
WOP-12ac firmware update;
SNMP configuration;
wireless interfaces configuration (operation mode, band);
virtual access points configuration;
monitoring of wireless network main parameters.
The manual gives an example of access point configuration without using a soft
WLC
controller.
The following scheme is given as an example.
Figure 1 – Example of network configuration
Type of the network
VLAN used
SSID used
Encryption/authorization
by password
Inner corporate wireless network
using 2.4 and 5 GHz bands. The
network is isolated from other
guest networks. To connect to
the network, password
authorization is required. The
network is dedicated to secure
data exchange among company
staff.
100
WorkNetwork
WPA/WPA2
Guest wireless network using 2.4
and 5 GHz bands. The network
does not require password
authorization. It is dedicated to
connect users with standard
wireless gadgets to a public
network for Internet access, for
instance.
1 (without VLAN)
FreeNetwork
No encryption and
authorization
To perform the configuration, a PC with access to the device via Ethernet and any web browser (Internet
Explorer, Firefox, Google Chrome, Opera, etc.) are required.
