WOP-12ac. Quick guide
17
•
•
•
•
•
•
•
9.4 Monitoring
To view sessions parameters of clients connected to the access points of given cluster, switch to the
Sessions
tab.
Clients are defined through MAC addresses and an access points which they are connected to.
To view the statistics, select necessary value and click
Go
in the
Display
section. The following parameters
might be viewed:
AP Location – access point physical location. The value is obtained from location description on the
Access Points
tab;
User MAC
– MAC address of client wireless device;
Rate
– transmit data rate between an access point and a particular client, in Mbps;
Signal
– level of signal received from an access point, dBm;
R
х
Total
– total number of packets received by a client within current session;
T
х
Total
– total number of packets transmitted by a client within current session;
Error Rate
– total number of packets dropped by an access point within current session.
To view correspondence of access points in a cluster and wireless networks detected by these devices, switch
to the
Wireless Neighborhood
tab.
