WB-15-W. User manual
24
•
•
•
•
•
•
4.4.6 The «Scan Environment» submenu
In the «Scan Environment» submenu, scanning of the surrounding radio is carried out and detection of neighboring
access points.
After clicking on the 'Scan' button, the process will be launched. After the scan is completed, a list of detected
access points and information about them will appear:
SSID
– SSID of the detected access point;
Security
– security mode of the detected access point;
MAC
– MAC address of the detected access point;
Channel
– radio channel on which the detected access point operates;
Bandwidth
– width of the radio channel used by the detected access point, MHz;
RSSI
– the level with which the device receives the signal of the detected access point, dBm.
Please note that during the environment scan, the device’s radio interface will be disabled, which will make
it impossible to transfer data to Wi-Fi clients during the scan.