ELTEX TAU-36.IP Скачать руководство пользователя страница 108

Страница: 108 / 205

_________________________________________________________________________________

108 TAU-72.IP/TAU-36.IP Universal Network Terminal

TAU-72.IP/TAU-36.IP v1, v2 (v3, v4).

Adding records to the packet routing table (16 rules max.): in 'VID' field, enter an identifier of VLAN group,

that the routing rule is created for, and assign actions for each port to be performed during transfer of packets
with specified VID.

—

unmodified

—packets will be sent by the port without any changes (i.e. as they have been

received).

—

untagged

—packets will always be sent without VLAN tag by this port.

—

tagged—packets will always be sent with VLAN tag by this port.

—

not member

—packets with specified VID will not be sent by this port (i.e. the port is not the

member of VLAN).

—

override

—when checked, override 802.1р priority for this VLAN; otherwise, leave the priority

unchanged.

—

priority

—802.1р priority assigned to packets by VLAN, if

'override'

checkbox is selected.

Then, click

'Add New Rule'

button.

To remove records, select checkboxes for the rows to be removed and click

'Remove selected'

button.

'Update Switch'

and

'Commit'

buttons allow to retain access to the switch when switch settings are

applied.

Click

'Commit'

button in 30 seconds interval to confirm newly applied settings, or the

previous settings will be restored.

Содержание TAU-36.IP














































































































































































































Результаты поиска

Содержание TAU-36.IP

Отзывы:

Бренды по названию

Популярные бренды

ELTEX TAU-36.IP, Руководство по эксплуатации

Результаты поиска

Содержание TAU-36.IP

Отзывы:

Бренды по названию

Популярные бренды