ELTEX NV-711, Руководство пользователя

Страница: 9 / 54

User manual for NV-711, NV-711-Wac 9
Table 3 – Description of connectors and controls located on the rear panel of the device
Rear panel element Description
1 ON/OFF The button for switching the device on/off
2 5V Connector for power adapter
3 HDMI HDMI connector for transmitting high-quality digital video and audio signals to
the TV.
4 AV OUT AV OUT connector for analogue video and audio signals transmission to a
acoustic system or TV set.
5 LAN 10/100 RJ-45 connector of LAN Ethernet for connection to a service provider network.
6 IR A connector for an external IR receiver.
2.2.1 Ethernet port light indication
The status of Ethernet interfaces is indicated by LEDs built into the 10/100 connector.
Figure 4 – RJ-45 connector
Table 4 – Light indication of Ethernet interfaces
ACT indicator LINK indicator Ethernet interface status
Off Off
The port is off or the connection is not estab-
lished
Off Flashes Data transfer in 100BASE-T mode
Flashes Off Data transfer in 10BASE-T mode
2.3 Side panel of the device. USB port
Figure 5 – Side panel of the device
USB 2.0 port ( )located on the side panel of the device is dedicated for connection of peripheral
devices: external hard drives, flash drives, input devices (keyboard, mouse).
You can connect external devices such as USB hub to increase the number of USB devices that can be
connected at the same time.