___________________________________________________________________________
_______________________________________________________________________________
LTP-8X optical line terminal
137
Chapter 34.
Ventilation Units Replacement
The terminal design allows ventilation units replacement even when the terminal is on.
Fig. 34.1. Ventilation Unit. Installation to the Case
To remove a ventilation unit, perform the following actions:
Step 1.
Use a screwdriver to remove the right screw connecting the ventilation unit with the rear panel
(see Fig. 34.1).
Step 2.
Carefully pull the unit until it is removed from the case.
Step 3.
Disconnect the unit from the terminal socket (see Fig. 34.2).
Fig. 33.2. Ventilation Unit Connector
