ELTEX LTP-4X, Руководство по эксплуатации

Страница: 47 / 199

47
12.2 Adding a New User
In order to operate effectively and safely, the terminal, as a rule, requires one or several additional users.
To add a new user, enter the user command in the configure view:
LTP-8X(config)# user operator
LTP-8X(config)# do show users config
## Name Privilege
1 root 15
2 admin 15
3 remote 15
4 operator 0
LTP-8X(config)#
Pass the name of the new user as a parameter to the user command. The name should not be longer
than 32 characters. The name should not contain special characters.
12.3 Changing User Password
To change user password, enter the user command. Pass the user name and a new password as
parameters.
LTP-8X(config)# user operator password newpassword
The password should not be longer than 31 characters and shorter than 8 characters. If the password
contains a space, use quotations for the password.
12.4 Viewing and Changing User Access Rights
To manage user access rights, a user priority system is implemented. A newly created user is granted with
a minimal set of permissions:
LTP-8X(config)# user operator
LTP-8X(config)# do show users config
## Name Privilege
1 root 15
2 admin 15
3 remote 15
4 operator 0
LTP-8X(config)#
To change the user priority level, enter the user command. Pass the user name and a new priority as
parameters.
LTP-8X(config)# user operator priviledge 15
LTP-8X(config)# do show users config
## Name Privilege
1 root 15
2 admin 15
3 remote 15
4 operator 15
LTP-8X(config)#