ELTEX ESR-10 Скачать руководство пользователя страница 307

Страница: 307 / 440

ESR service routers. ESR-Series. Functionality description. Version 1.12.0

307

7.8.1 Base configuration algorithm

Step

Description

Command

Keys

Go to the content provider
configuration.

esr (config)# content-
provider

Specify edm server IP address.

esr (config-content-
provider)# host address
<A.B.C.D | WORD |
X:X:X:X::X>

<IP-ADDR> – IP address, defined as

AAA.BBB.CCC.DDD where each part
takes values of [0..255];

<IPV6-ADDR> – RADIUS server IPv6

address, defined as X:X:X:X::X where
each part takes values in hexadecimal
format [0..FFFF].

WORD(1-31) - DNS name of the server.

Set the port to connect to the
edm server.

esr (config-content-
provider)# host port

<PORT>

<PORT> – number of sender TCP/UDP

port, takes values of [1..65535].

Set the type and partition of the
external device to create a
crypto store.

esr (config-content-
provider)# storage-
device <DEVICE>

<DEVICE> – label and partition name on

the external storage in the format of

usb://Partion_name:/

mmc://Partion_name:/

Set the time to reboot the
device after receiving the
certificate.

esr (config-content-
provider)# reboot
immediately | [time
<HH:MM:SS>]

Restart the device after receiving the
certificate.

time <HH:MM:SS> – The time at which

esr will reboot
<hours:minutes:seconds>.

Enable content provider.

enable

Set the interval for accessing
the edm server in hours.

esr (config-content-
provider)# upgrade
interval <1-240>

Specify description (optional).

esr (config-content-
provider)# description
edm

LINE(1-255) String describing server

Create IP addresses lists which
will be used during filtration.

esr (config)# object-
group network <WORD>

esr (config-object-
group-network)# ip
prefix <ADDR/LEN>

<WORD> – server name, set by the

string of up to 32 characters.

<ADDR/LEN> – subnet, defined as

AAA.BBB.CCC.DDD/EE where each part
AAA-DDD takes values of [0..255] and EE
takes values of [1..32].

Содержание ESR-10

























































































































































































































































































































































































































































Результаты поиска

Содержание ESR-10

Отзывы:

ELTEX ESR-10, Руководство пользователя, Страница: 307 / 440

Результаты поиска

Содержание ESR-10

Отзывы: