About Power System Configuration
User Guide •
Smartpack S Controller
21
350030.013, 1v0-2012-06
Refer to these topics (Mains, Rectifiers, etc.) for more information about the avail-
able Alarm Monitors parameters.
Read also the topic
"Typical Parameters for Alarm Monitors" on page 29
4 - Commands options
The options in this logical group let you issue or activate specific commands, such
as resetting manual alarms, deleting the event log, starting battery tests, etc.
Issuing commands is allowed at this level, using a Pin-Code.
Notice:
The default Service Access Level password or Pin-Code is <0003>. We strongly recommend
changing the passwords as soon as the power system is installed.
The commands are organized in following groups:
• System Commands
• Battery Commands
• Outputs Test
Read about