The Smartpack S Controller
User Guide •
Smartpack S Controller
13
350030.013, 1v0-2012-06
Front Panel Operation
This chapter describes the
Smartpack S
controller’s keys and indicators, and how
to operate the
Smartpack S
-based DC power system from the controller’s front
panel.
Figure 5. Smartpack S controller’s front keys and indicators
Graphical Display
The Graphical Color Display — 2.2” TFT — is either in Status Mode (displays the sys-
tem’s status) or in Menu Mode (displays the menu structure).
The
Smartpack S
controller has the following LED indications:
Table 2. Description of the Smartpack S controller’s LED illumination status
Front Keys
You can operate the power system navigating intuitively through the graphical
menu structure via the following 4 front keys. We recommend using a pen or similar
tool to press the keys, as they are small.
• The Enter or Left arrow key
When entering numbers, a short press of this key navigates to the left.
A long press of this key to enter and save data
• The Cancel or Right arrow key
When entering numbers, a short press of this key navigates to the right.
A long press of this key to cancel or abort data
• The Up and Down arrow keys
to navigate up- or downwards the menu icons, point at options and
increase and decrease values
“Alarm”
LED lamp (red)
Arrow keys
“Enter” key
“Cancel” key
“Power”
LED lamp (green)
Smartpack S
controller
“Warning”
LED lamp (yellow)
LED Indicator Illumination Status
Description
Power
OFF
ON green
The controller has NO supply
The supply is healthy
Warning
OFF
ON amber
No Warning
Warning (Minor alarm, Non-critical alarm)
Alarm
OFF
ON red
No Alarm
Alarm (Major alarm, Critical Alarm)