_________________________________________________________________________________
GsmAlarm-600
Software Ver. 1.07
GSM ALARM AND REMOTE CONTROL SYSTEM
GsmAlarm-600 (V1.07)
FEATURES
•
The user is called upon triggering of the alarm and is informed by a voice message which
sensor has tripped and how many times.
•
16 inputs. Up to 32 zones.
•
Up to 64 zones, using wireless detectors.
•
7 programmable low current outputs and one siren output.
•
5 users are notified.
•
20 programmable keypad access codes or iButton keys.
•
Automated remote control using up to 250 numbers Caller ID recognition without call cost.
•
Possibility to transfer data to alarm monitoring station by SIA DC-09 IP protocol (via GPRS
channel), data encryption by AES128, AES196 or AES256 algorithm.
•
Possibility to transfer data to alarm monitoring station using the Contact ID protocol
through GSM (voice call).
•
Possibility to connect to SmartCloud server. Monitoring and control of the system can be
performed from any computer or smart phone using a standard web browser.
•
Remote control using a mobile phone keypad (through DTMF tones) and SMS.
•
GSM JAMMING detection).
•
24 hour timer.
•
Two partial arming modes (STAY and SLEEP).
•
Possibility to divide the system into two independent partitions.
•
Option to connect an external microphone.
•
16 temperature, humidity, 4-20 mA and other analogue sensors connection availability.
•
Possibility to connect up to 16 temperature sensors for temperature measurement.
•
Ability to enter zone/partition names and their temperatures by means of K32LCD keypad.
•
Possibility to connect up to 4 keypads.
•
Info-carrying SMS showing state of each sensor, power supply voltage, GSM signal strength.
•
Remote diagnostic, programming and firmware upgrade over GPRS.
•
Diagnostic, programming and firmware upgrade via USB connection.
•
Integrated dual-band GSM module.
•
Wide operating temperature range: -30 … +65ºC.
•
Cheap maintenance