ELTEC CYBOX GW 2-P, Руководство по установке

Страница: 15 / 22

7
CYBOX GW 2-P
e s
IN
ST
AL
LA
TI
O
N
M
AN
U
AL
3.3 ANTENNA CONNECTORS
The QLS antenna connectors are located at the lower part of the front panel. All connectors are labeled for
each radio interface and GNSS.
When connecting an antenna to the QLS connector, make sure that you hear a ‘click’ sound confirming
proper mounting.
To remove an antenna, it has to be gently pulled from the basis of the connector with one hand while the
other hand is holding the antenna. Alternatively, a screwdriver can be used as a lever arm at the basis of
the antenna to facilitate the removal as illustrated below.
STEP 1 STEP 2
Place the screwdriver between the connector and
the gateway Rotate and/or push the screwdriver while pulling
the antenna