6
GW-GNET+
Page 98
gas-lab
Q1
6.1 Compiling and exporting a parameterisation: Brief
description
To create a completely new
gas-net
parameterisation, please proceed as
follows:
1. Start GW-BASE from the Windows environment by double-clicking the
lantern icon.
2. Invoke the GW-GNET+ module by clicking the
New
– Create
gas-net
parameterisation
tool in the toolbar. Alternatively, you may select the
Tools
– New – Create
gas-net
parameterisation
menu item from the main
menu.
3. Select the device type you want to parameterise in the appearing dialog box
and the version number of the device software in the next step. In the
subsequent dialog box choose an existing standard parameterisation, on
which the new parameter data record shall be based.
After you have confirmed your selection by clicking
OK
, the GW-GNET+
interface is activated.
4. The
Modules and linkages
window contains one white box with a name
and icon for each module included in the device software. By double-
clicking this box you activate a dialog box listing all parameters that belong
to the module concerned.
Adjust the settings according to your requirements.