Elsner KNX VOC-UP basic, Инструкция по установке и настройке

Страница: 24 / 28

22 Parameter setting
Mixed gas sensor KNX VOC-UP basic • Version: 27.01.2020 • Technical changes reserved. Errors reserved..
Behaviour on release of the switching output is dependent on send behaviour
5.7.2. AND logic connection inputs
do not use
Logic input 1
Logic input 1 inverted
Logic input 2
Logic input 2 inverted
Logic input 3
Logic input 3 inverted
Logic input 4
Logic input 4 inverted
Logic input 5
Logic input 5 inverted
Logic input 6
Logic input 6 inverted
Logic input 7
Logic input 7 inverted
Logic input 8
Logic input 8 inverted
Logic input 9
Logic input 9 inverted
Behaviour of the switching output
With blocking • do not send message
• send value for logic = 0
• send value for logic = 1
Value of the parameter
"Send behaviour": Settings options
"Behaviour of the switching output on
release":
on change of logic • do not send message
• send value for current logic status
on change of logic to 1 • do not send message
• if logic = 1

send value for 1
on change of logic to 0 • do not send message
• if logic = 0

send value for 0
on change of logic and periodically send value for current logic status
(no selection)
on change of logic to 1 and periodically if logic = 1

send value for 1
(no selection)
on change of logic to 0 and periodically if logic = 0

send value for 0
(no selection)
on change of logic and receipt of object • do not send message
• Status object/s send/s
on change of logic and receipt of object
and periodically send value for current logic status
(no selection)