14
Setting the parameters
Cala KNX M-T push button
• Version: 13.09.2019 • Technical changes and errors excepted.
5.4.1. Push button 1 / 2 / 3 / 4
Set the function of the push button.
Push button as switch
Specify which value is sent when pressing/holding the push button and when.
Push button as selector switch
Specify whether a switch is performed when pressing or holding and whether there is
an additional function after holding the push button for a long period.
Function
• Switch
• Selector switch
• Blind
• Shutters
• Awning
• Windows
• Dimmer
• 8-bit encoder
• 16-bit encoder
• Scenario recall/ Scenario storage
Function
Switch
Command when pressing the button
• 0 Send
• 1 Send
• Do not send message
Command when releasing the button
• 0 Send
• 1 Send
• Do not send message
Send value
• If there is a change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Cycle (
if transmission is "cyclical"
)
5 s • ... • 1 min • ... • 2 h
Function
Selector switch
Use additional function for button held
down
No • Yes
Use additional function for button held
down
No
Command when pressing the button
• Switch
• Do not send message
Command when releasing the button
• Switch
• Do not send message
