Motor Control Unit MSG1 compact
1
Motor Control Unit MSG1 compact
• Version: 02.06.2020 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de •
Technical Service: +49 (0) 7033 / 30945-250
MSG1 compact
Motor Control Unit
1.
Description
The
Motor Control Unit MSG1 compact
controls 230 V drives, e.g. shading or
window motors. The relay at the motor output is a low-wear zero-crossing switch.
The device is equipped with inputs for central control and for a manual switch. The
central input can be set to dead man's switch or lock and is suitable e. g. for timers,
push buttons or control systems. An unlocked twin push button is connected to the
switch input for manual operation. This input is equipped with time-automated but-
tons (step operation/lock).
Functions:
•
Output for a
230 V AC drive
(Up/Down)
•
Use as a
central, group and single controller
•
Central input
up/down 12...28 V DC (with priority) e.g. for switches, controls
•
Setting the central control unit to "Dead man" or "Lock". As long as voltage is
present at the central input, the manual operation is blocked
•
Manual operation
by connecting an unlocked double push-button to the
Input "Local".
Push-button timer automatic: Inching mode (press for less than 1 second):
Drive inches, for example for positioning slats on shutters.
Drive mode (press for longer than 1 second): Drive travels automatically to
the final position
•
Lockout inputs
for Local Up, Local Down, Central Down
•
Direction change pause 1 second
1.1. Deliverables
•
Motor control unit
1.2. Technical specification
The product conforms with the provisions of EU directives.
2.
Installation and start-up
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
•
VDE regulations and national regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
•
Do not use the device if it is damaged.
•
Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is no
longer guaranteed.
The device is only to be used for the intended purpose described in this manual. Any
improper modification or failure to follow the operating instructions voids any and
all warranty and guarantee claims.
After unpacking the device, check it immediately for possible mechanical damage.
If it has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when as-
sembled and after conclusion of all installation and operational start-up tasks and
only in the surroundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may
occur after publication of these operating instructions.
2.2. Safety notice for automatic functions
WARNING!
Risk of injury from automatically moving components!
Parts of the system can be started by the automatic controls
and be a danger to persons.
•
No persons may remain in the travelling range of parts
driven by an electric motor.
• Adhere to the relevant building regulations.
•
Ensure that the return path/access to the building is not blocked
if spending time outside the building (danger of being locked out).
•
Correctly decommission the system for maintenance and
cleaning work.
If there is a power outage, the system does not work. Therefore, shadings should be
moved to a save position if there are anticipated weather conditions, for example, if
this has not already been done by the automatic function (product protection).
If the power supply is removed, the connected drive switches off. When the power
is restored, the consumer remains switched off until a new movement command is
received by the actuator.
2.3. Design of the MSG1 compact / Connection
Connection example 1
Assembly
Installation
Protection category
IP 20
Dimensions
Ø approx. 53 mm, depth approx. 29 mm
Weight
approx. 80 g
Ambient temperature
Operation -20…+45°C, storage -55…+90°C.
Avoid condensation
Operating voltage
230 V AC
Power consumption
Operation maximum 2.0 W
Maximum load
Each terminal contact may be loaded with a
maximum of 10 A.
Output
1× 230V drive (Up/Down/PE/N)
Inputs (SELV)
1× Central command (Up/Down/+/-)
1× Manual command via present button (Up/
Down/+/-)
1× Lock Local Down
1× Lock Local Up
1× Lock Central Down
Voltage for inputs 12...28 V DC
Maximum line length 100 m
Lock mode
Command at least 1 s
Travel time 4 min
Direction change pause
1 s
Technical specifications and
installation instructions
Article number 70454
Fig. 1
1 Lock inputs: Local down/up, Cen-
tral down
2 Central input (up/down),
Voltage - (12...28 V DC) for inputs
3 V (12...28 V DC) for in-
puts,
Push-button input local (up/
down)
4 Mode LED
5 Actuator output (down/L/N/up),
Operating voltage (L/N)
1
3
4
5
2
N
PE
L
PE N
Control/
Fig. 2
The internal voltage (9 ... 12
V DC) is used to supply the
inputs. When using several
motor control units which
receive the same central
command, the "-" connec-
tions must be bridged for
potential equalisation.
In this way, a
MSG1 com-
pact
can supply up to 100
additional motor control
units with power for central
control.
Each terminal contact may
be loaded with a maximum
of 10 A.
Central command
Mains
Central
further MSGS
Button local
230 V AC
EN
