5
Installation and start-up
Radio actuator KNX RF-MSG-DST
• Version:27.06.2018 • Technical changes and errors excepted.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
2.1.1. Safety advice
WARNING!
Risk of injury caused by components moved automatically!
If the wireless connection between the control unit and the wireless
actuator is interrupted, connected devices can no longer be operated.
•
For that reason do not connect drives to the wireless actuator which
could be hazardous to human life!
2.2. Notes on wireless equipment
When planning facilities with devices that communicate via radio, adequate radio re-
ception must be guaranteed. The range will be limited by legal regulation and struc-
tural circumstances. Avoid sources of interference and obstacles between receiver and
transmitter, that could disturb the wireless communication. Those would be for exam-
ple:
•
Walls and ceilings (especially concrete and solar protection glazing).
•
Metal surfaces next to the wireless participants (e. g. aluminium construction
of a conservatory).
•
Other wireless devices and powerful local transmitters (e.g. wireless
headphones), which transmit on the same frequency. Please maintain a
minimum distance of 30 cm between wireless transmitters for that reason.
2.3. Connection
The radio module is connected between the appliance and the power supply. It may
only be connected to flexible lines using STAK/STAS connectors. The connectors must
be locked using the locking bow.
Do not expose to continuous sun radiation
to avoid overheating.
The housing is not UV-resistant.
•
Assembly the device in a protected area (e. g. in
the box for the blinds/marquee/shutters in a construction
profile beneath the roof tiles or in a housing).
The antenna symbol on the housing shows the
position of the antenna in
KNX RF-MSG-DST
. This
side must not be positioned directly on metal
surfaces or objects. Otherwise, the radio signal might
disturbed.
Metal
profile
K
N
X
RF-
M
SG
-D
ST
Содержание KNX RF-MSG-DST
Страница 1: ...EN Installation and Adjustment Item number 70712 KNX RF MSG DST Radio actuator...
Страница 2: ......
Страница 25: ......