40
Setting of parameters
Indoor Sensor KNX AQS/TH
• Date of issue: 13.10.2011 • Subject to technical changes. Errors excepted.
4.15.2. Linkage inputs for AND Logik
do not use
Logic input 1
Logic input 1 inverted
Logic input 2
Logic input 2 inverted
Logic input 3
Logic input 3 inverted
Logic input 4
Logic input 4 inverted
Logic input 5
Logic input 5 inverted
Logic input 6
Logic input 6 inverted
Logic input 7
Logic input 7 inverted
Logic input 8
Logic input 8 inverted
Logic input 9
Logic input 9 inverted
Logic input 10
Logic input 10 inverted
Logic input 11
Logic input 11 inverted
Logic input 12
Logic input 12 inverted
Logic input 13
Logic input 13 inverted
Logic input 14
Logic input 14 inverted
Logic input 15
Logic input 15 inverted
Logic input 16
Logic input 16 inverted
on change of logic to 0
• do not send telegram
• if slogic = 0
send value for 0
on change of logic and periodically
send value for current logic status
(no selection)
on change of logic to 1 and periodically
if logic = 1
send value for 1
(no selection)
on change of logic to 0 and periodically
if slogic = 0
send value for 0
(no selection)
on change of logic and receipt of object
• do not send telegram
• send status of the switching output
on change of logic and receipt of object
and periodically
send value for current logic status
(no selection)
