19
Setting of parameters
Indoor Sensor KNX AQS/TH
• Date of issue: 13.10.2011 • Subject to technical changes. Errors excepted.
4. Setting of parameters
4.1. General settings
4.2. Temperature measured value
If no external measured value is used:
Transmission delays after power-up and programming for:
Measured values
5 s • 10 s • 30 s • 1 min • … • 2 h
Threshold values and switching outputs
5 s • 10 s • 30 s • 1 min • … • 2 h
Controller objects
5 s • 10 s • 30 s • 1 min • … • 2 h
Logic outputs
5 s • 10 s • 30 s • 1 min • … • 2 h
Maximum telegram quota
1 • 2 • 3 • 5 • 10 • 20 Telegrams per second
Use temperature/humidity malfunction
object
No • Yes
Use CO2 malfunction object
No • Yes
Offset in 0,1°C
-50 … +50
Use external measured value
No • Yes
