3
Description
KNX eTR 205/206 Light push button
• Version: 16.12.2020 • Technical changes and errors excepted.
1.
Description
The
KNX eTR 205/206 Light push button
has touch-sensitive buttons with which
functions can be called up in the KNX building bus system. The glass surface is printed
with areas for setting the temperature and light. LEDs are integrated in these areas and
their behaviour can be adjusted.
A temperature sensor is integrated into
KNX eTR 205/206 Light
. An external tem-
perature reading can be received via the bus and processed with its own data to create
a total temperature (mixed value).
The
KNX eTR 205/206 Light
has a PI controller for heating and cooling. The setpoint
temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
Functions:
•
Operating zone for temperature control
with 2 areas (warmer, cooler)
•
LEDs
can be set. All LEDs Off, all LEDs as ambient lighting, all LEDs
individually controllable
•
Area function
when touching two or more push buttons. Can be configured
as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
•
Temperature
measurements.
Mixed value
from own measured value and
external values (proportion can be set by percentage), output of minimum and
maximum values
•
PI-controller for heating
(one or two-level) and
cooling
(one or two-level)
according to temperature. Regulation according to separate setpoints or basic
setpoint temperature
•
2 AND and 2 OR logic gates
each with 4 inputs. 8 logic inputs (in the form
of communications objects) can be used as inputs for the logic gates. The
output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Additional functions KNX eTR 205 Light:
•
1 operating zone for light
with 2 areas (switching/dimming with short/long
distinction)
Additional functions KNX eTR 206 Light:
•
2 operating zones for light
with 2 areas (switching/dimming with short/long
distinction)
Configuration is made using the KNX software ETS 5. The
product file
can be
downloaded from the ETS online catalogue and the Elsner Elektronik website on
www.elsner-elektronik.de
in the “Service” menu.
1.0.1. Area function
If the area function in ETS has been activated, another function is available alongside
the regular key functions. This is triggered by touching multiple keys, e.g. if you touch
the sensor with the palm of your hand.
Содержание 71160
Страница 2: ......
