17
Remote control set-up
Remote control Remo KNX RF
• Version: 14.02.2018 • Technical changes and errors excepted.
(1) Swipe the screen from the top edge downwards to open the settings menu.
(2) Tap
Programming mode
.
(3) Switch the programming mode
On
. Start the programming in the ETS.
With the active programming mode, the menu item lights up red (similarly to programming
LED on other devices), and the display remains on (automatic switch-off inactive).
Tap
Back
at the bottom edge to return to the previous settings menu. Swipe from the bot-
tom edge upwards to close the settings menu.
7.
Remote control set-up
7.1.
Display
Custom adjustment of display brightness, key tone volume and automatic switch-off of the
display (2—30 seconds).
Menu: Display.
(1) Swipe the screen from the top edge downwards to open the settings menu.
(2) Tap
display
.
(3) Change the settings by moving the controls.
Tap
Back
at the bottom edge to return to the previous settings menu. Swipe from the bot-
tom edge upwards to close the settings menu.
1
2
3
