14
Transmission protocol
Power Supply Systems KNX PS640+ and KNX PS640+USB
Version: 19.08.2020 • Technical changes and errors excepted.
Reset of the linie:
Other:
5.1.2. Messages
1 bit malfunction objects:
What shall be used for the reset?
display and keyboard
Yes
object „permanent reset“
1 = reset | 0 = no reset
No • Yes
object „time reset“
1 = 30 seconds reset | 0 = no reset
No • Yes
Use object „reset status of the line“
No • Yes
Maximum telegram quota
1 • 2 • 3 • 5 • 10 • 20 Telegrams per
second
General sending delay after
power up and programming
5 sec • 10 sec • 30 sec • 1 min • … • 2 h
Object „overload“
• do not send
• send in case of change
• send in case of change to 1
• send in case of change to 0
• send in case of change and cyclically
• send in case of change to 1 and cycli
-
cally
• send in case of change to 0 and cycli
-
cally
Sending cycle
(only if sending „cyclically“)
5 sec • 10 sec • 30 sec • 1 min • … • 2 h
Object „external overvoltage“
[The setting options are similar to
object „overload“]
Object „internal overvoltage“
[The setting options are similar to
object „overload“]
Object „short circuit“
[The setting options are similar to
object „overload“]
Object „overtemperature“
[The setting options are similar to
object „overload“]
Object „system defect“
[The setting options are similar to
object „overload“]
