elsner elektronik 60121 Скачать руководство пользователя

Страница: 74 / 148

Installation

Control System WS1 Color / WS1000 Color

• Version: 14.12.2016 • Technical changes and errors excepted.

Fitting the lower part with mounting

Now, first of all, assemble the lower part of the housing with the integrated mounting
for wall or pole installation.

Wall installation

Use fixing materials (dowels, screws) that are suitable for the base.

Fig. 7
Pull the lid and lower part completely apart.
This also releases the plug-in connection be-
tween the board in the lid and the socket in
the lower part.

Fig. 8
The device is installed with two screws. Break
off the two longitudinal holes in the lower
part of the housing.

Longitudinal holes

Fig. 9 a+b
a) If the power lead is to be hidden when in-

stalled, it must emerge from the wall in
the vicinity of the rear of the housing
(marked area).

Содержание 60121





















































































































































Результаты поиска

Содержание 60121

Отзывы:

Похожие инструкции для 60121

Бренды по названию

Популярные бренды

elsner elektronik 60121, Руководство по установке и эксплуатации

Результаты поиска

Содержание 60121

Отзывы:

Похожие инструкции для 60121

Бренды по названию

Популярные бренды