61
Automatic settings
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
3.2.1. Adjust twilight value
You can adjust the threshold value above which twilight/night will be recognised. Note
that on moonlit nights, brightness values short below 10 lux can be achieved. If the twi-
light value is set below 10 lux, shades which are set to “close at night” will remain open
because of the moonlight or retract during the night.
The twilight settings can be accessed by pressing the buttons:
Use the arrow keys to set the value above which twilight or night will be recognised by
the control unit. Default setting: 10 Lux.
Confirm your setting with the
OK
button.
3.2.2. Adjust movement delays (shading elements)
You can adjust the delay time for shades. The movement delay prevents sun shades
from being constantly extended and retracted when there are rapidly changing light
conditions.
For the shade to extend, the brightness must lie above the set light intensity value un-
interruptedly for the set extension delay time (e.g. 1 minute). For the shade to retract
again, the light intensity for the set retraction delay time must lie below the value with-
out interruption for the set retraction delay time (e.g. 12 minutes). Clever selection of
the delay time “masks out” passing clouds and nonetheless permits the shade to react
quickly to the sun.
The movement delay settings can be accessed by pressing the buttons:
Use the arrow keys to set the values for the extension and retraction delays.
Default setting: Extension 1 minute, retraction 12 minutes.
Confirm your setting with the
OK
button.
3.2.3. Set timer
Sixteen periods can be set in the week-long timer, which can be used for different au-
tomation functions. A start and end point, as well as a day of the week must be set for
each time period.
Automatic
Settings
Twilight
System
General
Settings
Automatic
Settings
Movement Delays
System
General
Settings
