53
Automatic settings
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on: To set the ventilation unit to Automatic at a set point in time, select
Yes
(this is the default setting).
Switching off: To switch off the ventilation unit’s Reset function, select
No
.
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on: To perform an Automatic Reset after a manual intervention, select
Yes
.
Switching off: To switch off the ventilation unit’s Reset function, select
No
(this is the
default setting).
Confirm your setting with the
OK
button.
Automatic Reset time and/or period can be set.
System > Automatic Settings > General Settings > Automatic Reset
3.3. Define automatic reset
3.1.8. Automatic heating settings
For connected heatings the following automatic settings can be changed:
•
Indoor sensor to be used for the heating
•
Indoor day temperature
•
Night mode (period) and indoor night temperature
•
Enable/Disable automatic reset
The automatic heating functions can be accessed by pressing the buttons:
Now you can select individual heatings and adjust their settings. For each heating the
following settings can be changed:
Press the button to select the indoor sensor the control system will use for this heating
(Pre-setting: Internal sensor at WS1, first sensor in the list at WS1000). For as long as
“
No sensor
” is selected, the indoor sensor will not be taken into account for control
of the heating, i.e. no automatic control will take place.
Confirm your setting with the
OK
button.
Automatic Reset
For all ventilation units.
Automatic
Settings
Air Conditioner
System
Sensor Selection
