121
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
•
Set an access code to protect the “Installation” and “Automatic Settings”
menus from unauthorised changes
•
Storing the set-up data for the control system on the SD card or reading the
data from the SD card (only WS1000 Color)
6.2.1. Settings
In the menu area
System > WS1 / WS1000 Settings > Settings
you can adjust the
following settings:
•
Time and date
•
Language
•
Display
•
Calibrate touch
•
Time zone
•
Location
Enter time and date manually
Time and date are normally received by the weather station via the DCF77 respectively
GPS signal. Reception is normally available within around 10 minutes of starting up the
system. The date and time is then shown on the weather data display on the lower
right.
If no time signal is available, “Please set clock!” will show permanently in the display.
While this is being displayed, no weather animations can be shown. In this case, you
should set the clock by hand.
The time settings can be accessed by pressing the buttons:
Set the time and date by pressing the hour, minute, second, day, month and year fields
after one another and setting the current values.
Confirm your setting with the
OK
button.
Change language
The menus can be shown in German, English, French or Italian. Press the buttons:
Select the desired language for the menues by pressing the button. Confirm your set-
ting with the
OK
button.
WS1 / WS1000
Settings
Time and Date
System
Settings
WS1 / WS1000
Settings
Language
System
Settings