109
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Name
Press the button to change the name. Enter the desired name via the keypad that ap-
pears.
2.4. Input keyboard for names and codes
Confirm your input with the
OK
button.
Drive groups
Press the button to assign the internal buttons to drive groups or devices. All connect-
ed drives and devices appear. You can select several buttons. Confirm your selection
with the
OK
button.
Only drives/devices with the same functions should be operated
together with a single button (e.g. only blinds or only windows).
6.1.4. Set up multifunctional outputs
To the multifunctional outputs you can connect:
•
heatings
•
air conditioners
•
ventilation units
•
lights
•
roof gutter heatings
•
alarm equipment
•
dimmers
Specify here which devices are connected to the individual outputs. The settings for
the multifunctional outputs can be accessed by pressing the buttons:
You can now select individual outputs from the list and adjust their settings. So long
as no settings were completed yet, the buttons show (MF Output 1), (MF-Output 2) etc.
If an output was already configured, the function and/or name will be displayed in-
stead.
Press the button of the output to be set. For each multifunctional output the following
settings can be changed:
Group Button 1
Assign
Installation
Multif. Output
System
