102
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
6.1.
The “Installation” menu
In the menu area
System > Installation
you can adjust the following settings:
•
Specify fundamental characteristics of the drives and devices at the inputs/
outputs
•
Set up wireless connections to devices
•
Configure internal thermo-/hygrometer (WS1 Color only)
•
Define the order in which the drives and devices will be shown (e.g. in the
manual menu)
For this the following sub-menus are used:
•
Drive (with the option settings type, name, movement time, direction of
rotation, manual direction, MSG control, canvas tightening, slat turning, close-
contact)
•
External button (with the option settings type, direction, name and drive group
assignment)
•
Internal button (with the option settings type, name and drive group
assignment)
•
Multifunctional output (with the option settings type and name)
•
Multifunctional input (with the option settings type and name)
•
Wireless connection
•
Weather display (selection of indoor sensor for weather data display)
•
KNX settings (only if a KNX interface is installed)
•
Camera (only if a camera interface is installed)
•
WS1 TH (settings for the internal temperature/humidity sensor of WS1 Color)
•
Channel order
In order to be able to carry out the basic setting, the control unit must have been pro-
fessionally installed and commissioned.
4. Installation and 5. Commissioning
6.1.1. Set up drives and drive groups
The WS1 Color-0 model offers no drive outputs. The “Drive” key is grey.
In
this case, drives can still be controlled via radio motor control units (see
6.1. Wireless
connections
).
Windows, awnings and blinds are controlled in various ways. For example, windows
are opened or closed according to the temperature or air humidity, but blinds are
opened or closed according to the light or time. For this reason it is imperative that,
when started up, the control unit be adjusted accordingly.
The basic settings for the drives can be accessed by pressing the buttons:
Installation
Drive
System
