elsner elektronik 3090 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 40

elsner elektronik 3090 Скачать руководство пользователя страница 30

28

Setting of parameters

Weather Station Suntracer KNX-GPS light

• Version: 30.09.2020 • Technical changes reserved. Errors reserved.

If the threshold is set by a communication object:

If the threshold is set by communication objects, a threshold which is valid until the
first communication of a new threshold must be determined for the initial operation.
The threshold value communicated last can be used if the weather station is already in
operation.
From the 1st communication onwards, the threshold value corresponds to the value of
the communication object and is not multiplied by the factor 0.1.

If the threshold is set by communication object with saving of the last value:

As soon as a threshold has been set by means of a parameter or by means of a com-
munication object, the threshold set at last remains until a new threshold has been
transmitted by a communication object.

The thresholds set at last by communication objects are saved in EEPROM in order to
maintain them in case of voltage breakdown and to provide them as soon as there is
voltage supply again.

7.5. Wind force

Threshold value is set by

Communication object

Threshold value in 0.1°C
valid until 1st communication

-300 … 800; 200

Threshold value is set by

Com. object with saving of the last
value

Hysteresis of the threshold value in 0.1°C.

0 …100; 30

Activation delay

none • 1 s • 1 min... • 2 h

Switch-off delay

none • 1 s • 1 min... • 2 h

Output switches at

• TV above = ON TV-Hyst. below = OFF
• TV below = ON TV-Hyst. above = OFF

Communication object switching output
temperature threshold value 1 / 2 / 3 / 4

• do not send
• send in case of change
• send inverted in case of change
• send in case of change and periodically
• send inverted in case of change and peri-
odically

Measured value

• not send
• send cyclically
• send in case of change
• send in case of change and cyclically

From a wind force change of

1 m/s … • 4 m/s

Send and reset of the min. and max.
wind force value on request

do not release • release

Threshold value 1 / 2 / 3 / 4

not active • active

«
...
28
29
30
31
32
...
»

Содержание 3090









































Отзывы:

Нет отзывов