ELSA LANCOM Business 6000, Руководство пользователя

Страница: 137 / 174

|
Technical basics
137
|
ELSA LANCOM Business 6000
|
EN
the channel is free again, the originally bundled connection
automatically takes the channel back (always in the case of static
bundling, only as required when using dynamic bundling).
Y connection Off : The router holds the existing bundled connection on
this interface, the other connection must try a different interface or
wait if none of the interfaces with active channel bundling permit a
channel to be terminated.
7.4 IPX routing
The IPX router transmits data from networks which use IPX/SPX as network
protocol (e.g. Novell networks). When it is entered in the IPX routing table, a
remote network for the computers in the local network is made known. Up to
16 various networks can be entered in the routing table.
7.4.1 IPX addressing
A complete address in an IPX network consists of three parts: a network-
number, the MAC address of the network card and the socket number:
The network number can be dialed without restrictions. However, the
number must be clear beyond all accessible IPX networks in order to
guarantee a correct allocation.
The MAC address is securely embedded in each network component.
Only in special cases is another address used in the internal network.
In order to not only address a computer, but also a special service on this
computer, an IPX network uses the socket numbers. Therefore, the
various services are clearly identified.
7.4.2 Information on the LAN
If several separated LANs are required at a location, they do not necessarily
need to have their own cabling. Various logical networks can share a cable.
Various formats for the Ethernet packets are used so that the data of various
networks do not interfere with one another, and a network remains hidden
for the others. These formats are determined by the binding which belongs to
a distinct network number on this cable.
The network number and the accompanying binding must be given so that the
router can recognize to which network it belongs. If the network address
remains at the standard setting of '00000000', the router identifies the