ELSA GLADIAC 511, Руководство пользователя

Страница: 27 / 46

|
Technical data
27
| ELSA GLADIAC 5II |
EN
5.3.3 ELSA GLADIAC 511DVI
5.3.4 The VGA D-shell socket
Pin assignments
The ELSA GLADIAC 511 issues analog signals in accordance with the
requirements of directive RS-170. The synchronization information is sent
separately. If your monitor supports the switching of input impedance, the '75
Ohm' setting (= '75
Ω
') should be chosen for the R, G and B video inputs and
the '2 kOhm' setting (= '2k
Ω
') should be set for the sync inputs. You should
not try other switch settings at the sync inputs unless your monitor expects a
sync level that differs from that of most common monitors and does not
DVI socket
combined digital/analog connector
socket for the monitor
(29 pin)
VGA D-shell socket
connector socket for monitor
(15 pin)
Pin Signal Pin Signal
1 red 9 +5V
2 green 10 sync ground
3 blue 11 not assigned
4 not assigned 12 bidirectional data (SDA, DDC2)
5 ground 13 horizontal synchronization
6 red ground 14 vertical synchronization
7 green ground 15 data clock (SCL, DDC2)
8 blue ground