ELSA ECOMO 117LCD, Руководство пользователя, Страница: 25 / 42

Adjustments and Modifications
ELSA ECOMO 117LCD
19
How to adjust displayed colors to match colors on a printout
Color,
Color Balance The COLOR menu item initially allows you to choose between default system settings
and a custom setting of the color values (CUSTOM). Once you select CUSTOM, further
options for color balance present themselves (BALANCE). Select the color area (R,G,B)
by using the keys and change the intensity.
You can reset the values to their default setting by simultaneously pressing the plus and
minus keys.
Power save mode
Power Save This item on the OSD menu allows you to define whether or not the monitor should be
operated in the power saving mode. Set this option to either OFF or ON. You will find
more information about the power save mode in Chapter 'Technical data' on page 21.
The Adjust-VR knob as a general control dial
Adjust-VR All settings and values on the pages of the OSD menu can be configured with the
ADJUST keys. At this point you can also define whether or not these values should also
be modifiable by using the Adjust-VR knob. If you set the selection to the
symbol
(blue) the knob is activated to regulate the settings on the other menu pages. If no OSD
menu is active, the Adjust-VR knob continues to serve as a brightness control dial.
Adjusting the display of the OSD menu
OSD-PosI
OSD Time You can set both the position and the display time-period of the OSD menu on the mon-
itor. The display time-period can be set to a value between 1 and 15 seconds.
You can reset the values to the default settings by simultaneously pressing the plus and
minus keys.
Changing the resolution
Resolution Seven different resolutions are available in this page. Note that the visible part of the
display will be reduced if you select a lower resolution. In this case the display may not
use the entire area of the monitor. To enlarge the display, use the ZOOM key on the front
of the monitor.
Which resolutions and frequencies does the monitor support?
Information This page on the OSD menu provides you with information about the current resolution,
horizontal and vertical frequencies (FH, FV) and whether the signal used is a USER or PRE-
SET timing.