1
AS80CA11A
1080P IP Camera
Installation Instructions
General Introduction
The IP Camera is designed to monitor the premise where it is installed at in real
time, and send the images to the Gateway. The recording function will be
activated if an event is triggered under warning conditions. Its great compatibility
with our U-Net family security products makes it suitable for smart home cloud
based platform.
Product Layout
Front view
Rear view
Side view
Connecting camera to home Wi-Fi
The camera first needs to connect to your home Wi-Fi network. There are two
methods to do this
Method 1
: By QR code setup. A smartphone installed with ELRO Smart Home
Alarm App is required.
1. On the ELRO Smart Home Alarm App, go to System page and tap the QR
code icon on the top bar.
2. Enter your home Wi-Fi network and your Wi-Fi password, if any.
3. The App will then generate a large size QR code image. Leave the App on
that page.
4. Power up the camera using the supplied power adaptor and wait for a
musical tone. This usually takes about 30 seconds.
The musical tone indicates the camera is ready to scan the QR code created
earlier by the App.
1
Microphone
2
Lens
3
IR LED (hidden)
4
LED indicator
5
Reset/WPS button
6
Power jack
7
Micro-SD card slot
