Device description
elrest
Automationssysteme GmbH
e
VISIO PTE715_Windows.EN
Page: 38
Do not charge, disassemble or burn the battery!
The used lithium battery may cause damage from fire or chemical burns if misused. The
battery must not be charged, disassembled, warmed or burned to over 100 ° C (212 ° F).
Replace battery only by same type!
Replace the lithium battery only with a battery of the same type. There is a risk of fire or
explosion when using another lithium battery.
The battery must only be replaced by qualified personnel.
Please observe the ESD / ESD guidelines before changing the battery.
Improper handling of the batteries may result in a risk of explosion:
Never load
Do not open
Do not short-circuit
Do not reverse polarity
Do not heat above 100 ° C
Protect from direct sunlight
Do not allow moisture to condense on batteries
In the case of a necessary transport, the dangerous goods schedule for the
relevant carriers (labeling obligation) has to be complied.
Used lithium batteries have to be dumped in the hazardous waste. They must be
individually packed in a sealed plastic bag for disposal.
Do not open the lithium battery.
Poisoning!
General information:
Observe the following safety instructions for proper handling and disposal of lithium batteries
6.1.3
Device temperature
The ambient temperature
of the PTE must not be less than 0 ° C and not higher than 45 ° C
during operation.
Otherwise, all warranty claims will expire and the device may be destroyed.
