10.12.2011
PULSAR-EQmini
v 1.03
Pulsar-EQmini
is a professional, CPU controlled equalizer-balancer and cell tester for all Li-xxx cells.
Pulsar-EQmini
is capable of highly accurate and extremely fast extremely fast equalization of individual cells
within the battery packs which may contain between 2 to 6 cells. The cells are protected against overcharging or
excessive discharging. The high, constant power (up to 15W) and precise algorithms of equalizing current
control allows this device to work with battery packs with capacity of 0.1Ah to over 10Ah (even during fast
charging). During the design process of the device, we focused on the ability of the full output of information
about equalizing and the state of battery pack. Built in display shows charging/discharging process graph, bar
graphs of balancing process, actual voltage of each cell, min-max values etc. In addition, PC software included
with
Pulsar-EQmini
allows you to analyze and check your packs in detail.
When connected to some chargers like
Pulsar 1, Pulsar 2, Pulsar 2+
or
Akumatik
,
Pulsar-EQmini
can
force charger to reduce charging/discharging current if the voltage on any of the cells reach dangerous value (too
low or too high). This feature requires a special cable to connect
Pulsar-EQmini
to the charger.
Technical data
Cell types
Li-Ion, Li-Pol, Li-Ph
(Li-Ion FePO4)
Number of cells
2-6 cell (6 Channels)
Working voltage
6 – 30 V
Max. balancing power
15 W
Max. equalizing current (per cell)
0,25 A ; 0,5 A ; 0,75 A (continuous current)
Min. equalizing current (per cell)
25 mA ; 50 mA ; 75 mA (continuous current)
Quiescent current
6 mA for 2 cells ; 8 mA for 6 cells
Work modes
Test, Equal, Fast
Memory cells
3 independent
Timer (sleep)
2 h; 4 h; and no limit
Display LCD
133x64
Sound alerts
Yes
Dimensions
60 x 108 x 15 mm (W x L x H)
Weight 120
g
