ELPRO LIBERO WSI, Руководство

Страница: 1 / 2

How to exchange the LIBERO WSI Sensor 1
Version 1 | Tutorial LIBERO WSI Sensor | elpro.com
R E A D O U T
Alarm OK Warning
CONF
LOG LOG
PDF PDF
R E A D O U T
> 30 sec c.
1 sec.
> 20 sec.
ALKALINE
ALKALINE
ALKALINE
1
2
3
Alarm OK Warning
CONF
LOG LOG
S E A R C H
1 sec.
ALKALINE
ALKALINE
ALKALINE
Alarm OK Warning
CONF
LOG LOG
I D W S I
LIBERO WS
I
ID WSI
No
Con
Low
Bat
Run
ALKALINE
ALKALINE
LITHIUM
LITHIUM
1
Read out LIBERO W and archive PDF report.
3
Press pair button on LIBERO WSI sensor
1 second within 30 seconds.
5 Replace the 3 base batteries within
20 seconds – exchange one by one.
Note: Base uses
ALKALINE batteries.
Note: Sensor in fridges: ALKALINE batteries.
Sensor in freezers: LITHIUM batteries.
2 Press pair button for 1 second on base station.
„SEARCH“ appears on the display
of base station.
4
Once the sensor has been successfully paired,
the sensor ID will appear on the display of
base station for a few seconds, green LEDs will
blink again, you’ll hear a confirmation tone.
6 Insert the right battery type for the sensor.