ELPRO Libero Cx, Руководство по эксплуатации, Страница: 10 / 64

10 - EN liberoCONFIG
LI6003E
QUICK START
2
2 Quick start
Case elements 1. Protection cap
2. USB connector
3. Display; a non-configured LIBERO Cx displays "ConF".
4. Start/Stop button
5. Exp:XX/YYYY
Expiry date: The LIBERO Cx can no longer be used after this date.
Device ID: 7100 0000 000
Display 1. Run
Flashes when the LIBERO Cx is active; data logging or delay
2. Battery exhausted
Signals a low battery charge. Access to the data through the USB ports is still possible.
3. Profile
The displayed value corresponds with the Profile-ID

see 3.4.6 Handling Options - Profile-ID
4. Alarm indicator
The alarm indicator shows whether everything was within limits to date or if limits were
violated.
5. Temperature unit
6. Measured value or information
Start/Stop button
• A configured LIBERO Cx is started by pressing and holding the Start/Stop button for at
least three seconds.

3.4.6 Handling Options
• The Profile-ID can be displayed by briefly pressing the Start/Stop button when the
LIBERO Cx is configured or stopped.
• A running LIBERO Cx is stopped by pressing and holding the Start/Stop button for at
least three seconds.
• The Start/Stop button can be deactivated.

3.4.6 Handling Options