ELPRO ECOLOG-NET LP4, Руководство по эксплуатации

Страница: 18 / 32

18 - EN
ECOLOG-NET LP4
EL6006Ee
Contact inputs D1 and D2
7. Contact inputs D1 and D2
Assign
Defrost input

The status of D1 and D2 is not recorded in the alarm protocol and has no influence on the alarm contacts.
They are first logged to memory on the datalogger at the end of the following recording interval in memory.
In the measurement table elproLOG ANALYZE both contacts are represented as D1, D2 or MarkPos.
Alarm forwarding

Alarm forwarding is used in combination with the elproMONITOR software. The status (alarm / no alarm)
of the contacts is checked during the update of the monitor data. Status changes between two updates
are not detected.
Both inputs are busy with dual functions!
In each case, only one function should be used!
Function possible configurations
Assign D2 key D2 key
Defrost input D1 external D1 external
Alarm forwarding D1 external D2 external
D1 external and D2
external
D2 key See function F2, timestamp designated as D2 F

4. Menu
This function can be used to register incidents such as a watchman's patrol on the logger.
D1 external As defroster input (

6. Threshold value and alarm function ) or for alarm forwarding.
Wiring

8.3 Supply, Contact input, Alarm 2
D2 external For alarm forwarding.
Wiring

8.3 Supply, Contact input, Alarm 2