ELOVIS mSPEED smartsensor, Руководство пользователя

Страница: 11 / 23

ELOVIS 2 Interfaces
2.1
MECHANICAL
I
NTERFACE
The sensor head of µSPEED-smartsensor is equipped with a flange connector of the
company Binder (Germany).

series: 423

number of poles: 12

type: 09-0131-68-12

degree of protection: IP67
The following types of sockets (female) can be used for the above mentioned flange
connector:

straight: type: 99-5630-15-12

bent: type: 99-5630-75-12
The sensor cable, which is part of the scope of delivery, has on its end to the µSPEED-
smartsensor a fitting socket and on the other end a connector 15-pole standard Sub-D.
2.2 E
LECTRICAL
I
NTERFACE
2.2.1 V
OLTAGE

supply voltage: 18-30V (nominal 24V) controlled

wattage: max. 3W

pin assignment see 2.2.5.
2.2.2 E
MERGENCY
S
HUT
-
OFF
/ L
ASER
I
NTERLOCK

type of signal: one-sided (against signal ground)

min. signal voltage: 0V

max. signal voltage: 30V

switching voltage:

upward: approx. 19V

downward: approx. 7V

hysteresis: approx. 12V

pin assingment see 2.2.5.
status possibilities:

input voltage < switching voltage: emergency shut-off / laser protection

input voltage > switching voltage: standard operation
2.2.3 C
OMMUNICATION
I
NTERFACES
There are two separate, equitable interfaces for communication. One always existent
communication interface and one flee configurable multifunction interface.
ID308
6