elock EL-PB60S, Руководство пользователя

Страница: 1 / 6

Photoelectric Beam Detector
EL-PB60 S
Features
EL-PB60S Photoelectric Beam Detector ( 60M )
ƒ
Wide angle adjustment
ƒ
External light protection
ƒ
Protection against frost/dew, Guaranteed quality of front cover
ƒ
High convenience for installation and wiring
ƒ
Safety Approval: CE
Specification
ƒ
Protection range: Outdoor : 60m Indoor : 120m
ƒ
Detection method: Simultaneous breaking of 2 beams
ƒ
Infrared beam: Double modulation pulsed beams by LED
ƒ
Response time: 50 ~ 700mS
ƒ
Supply voltage: DC 10.8 ~ 25VDC(Non-polarity)
ƒ
Current: Max. 57mA
ƒ
LED: Tx : Power(Green LED),
Rx :Sensitivity good (Green LED),
When an alarm is initiated (Red LED)
ƒ
Alarm output: Dry contact relay output form C,
Contact action : Interruption time +delay time(1~3 sec),
Contact capacity : 30V(AC/DC) 1A or Less
ƒ
Tamper output: Dry contact relay output form N.C(Rx only),
Contact action : Activated when cover is detached,
Contact capacity : 30V (AC/DC) 1A or Less
ƒ
Temperature: -20
Ԩ
~ 60
Ԩ
ƒ
Beam Adjustment: Horizontal : 180˚(±90˚), Vertical : 20˚(±10˚)
ƒ
Mounting site: Indoor/Outdoor
ƒ
Material: Cover : PC resin, Base : ABS resin
ƒ
Dimension: 63 x 163 x 75mm (W x H x D)
ƒ
Weight: Rx : 330g, Tx : 315g
ƒ
Function: Monitor jack output, Frost proof cover
ƒ
IP rating: IP 44
EL-PB60S