Elo TouchSystems E125496, Руководство пользователя

Страница: 22 / 35

User Manual ET1002L, ET1302L, ET1502L 22
Section 5: Technical Support
If you are experiencing trouble with your touch monitor, refer to the following suggestions.
If the problem persists, please contact your local dealer or contact Elo Touch Solutions Customer Service. Worldwide technical support phone numbers
are available on the last page of this user manual.
Solutions to Common Problems
Problem Suggested Troubleshooting
The touch monitor does not respond when turning on
the system.
Check that the DC power adaptor is properly connected. Verify the
DC power adaptor is functioning
Please purchase the approved power source that is certified by an
IEC or UL through the specified dealer.
Monitor display is dim.
Use the OSD to increase the brightness.
Use the OSD to increase the contrast.
Monitor display is blank.
If the Power Status LED is blinking, the monitor or Computer Module may be in SLEEP mode. Press
any key/move the mouse/touch the touchscreen to see if the image reappears. Check that the signal
source device is turned on.
Check that that there are no loose cable connections.
Monitor displays the
“Out of Range” message.
Adjust your
computer’s resolution/timing mode to be within the allowable timing ranges
specified for your touch monitor (see website for specifications).
Monitor display image looks strange.
Adjust your
computer’s resolution/timing mode to be within the allowable timing ranges
specified for your touch monitor (see website for specifications).
Use the Auto Adjust function in the OSD.
Touch functionality doesn’t work.
Verify your PC has the latest Elo drivers installed.
Perform the calibration routine provided with the latest Elo drivers.
Neither the OSD nor power buttons
respond when pressed.
Check to see if the OSD lock or power lock functions are on.
Monitor sometimes displays black out when
video is via USB type-C to type-C cable
Suggest using Elo USB type-C to type-C cable PN: P/N: E710364
“No Signal Detected” message is stuck and
keep showing
Suggest using Elo USB type-C to type-C cable PN: P/N: E710364