ElMod FX Expander
Installation instructions and user manual
Read these instructions carefully before proceeding with the installation! Liability for damage due to improper
installation or non-observance of these instructions is expressly excluded.
Scope of delivery
•
ElMod FX Expander
circuit board
•
6 cables for connection of additional light sources
Connectors overview
Connection
The
FX Expander
is connected to the "Exp" connector of the central unit. The connector can be plugged in or
unplugged at any time. The central unit automatically detects this during runtime.
The LED on the
FX Expander
lights up as soon as the board is ready for operation and flickers to indicate that
data has been received from the central unit.
Srv1..3
Connectors for servo motors
BlinkerL
Connectors for two LEDs for the left indicator
BlinkerR
Connectors for two LEDs for the right indicator
Light1
Connectors for two LEDs for auxiliary light 1
Light2
Connectors for two LEDs for auxiliary light 2
Light3
Connector for one LED for auxiliary light 3
AuxMG
Connector for one LED for the muzzle flash of the auxiliary MG
