33
3-3
CONNECTING VIA WiFi
This section explains how to connect the TX-1 to a computer via WiFi.
①
Connecting the TX-1 directly to a computer via WiFi using the Access Point mode
②
Connecting the TX-1 to a computer through the ICB or third party’s wireless system using
the Station mode
①
Connecting the TX-1 directly to a computer via WiFi using the Access Point mode
1
．
Open the WiFi settings of your computer and select the SSID of the TX-1.
（
The SSID/key of the TX-1 is in the Information of the Menu. The SSID/key is in the
bottom of the TX-1.
For details about the WiFi settings of your computer, refer to the
instruction manual of your computer.
）
2
．
Enter the Key and connect to your computer wirelessly.
3
．
The WiFi LED starts to flash blue and then turns blue.
※
The [AP mode] icon will be displayed on the screen.
4
．
By connecting to a computer with “Image Mate 4 (TX-1 control software)” installed, you
can control the TX-1 from Image Mate 4.
※
Only one computer can be wirelessly connected to the TX-1 at a time.
②
Connecting the TX-1 to a computer through the ICB or third party’s wireless system using
the Station mode
1
．
Change the WiFi mode of the TX-1 to the Station mode.
［
MENU
］＞［
Settings
］＞［
Network mode
］＞［
Station
］
2
．
Press and hold the SET button of the wireless router “CRI-1” (separately sold).
3
．
The WiFi LED starts to flash green and then turns green.
※
The [STA mode] icon will be displayed on the screen.
4
．
By connecting to a computer with “Image Mate 4 (TX-1 control software)” installed, you
can control the TX-1 from Image Mate 4.
※
When using a third party’s wireless router, refer to the instruction manual of the router for
details of the connection procedure.
P.35
P.35
P.29