Elmo T-350, Инструкция по эксплуатации

Страница: 38 / 81

38
TURNING OFF THE SOUND
You can temporarily mute the sound from the built-in speaker.
1.
Press the button to mute the sound.
Press the button again to cancel the mute.
When the
“+” button near the mark on the remote control
is pressed while in mute, the mute will be released and the
volume will be increased by 1 level.
When the
“-” button near the mark on the remote control is
pressed while in mute, the mute will be released and the
volume will be decreased by 1 level.
HIDING THE IMAGE
You can temporarily hide the projected image with the
“Blank screen” function.
1. Press the MASK button on the remote control.
The blank screen will be displayed to hide the projected image.
Press the MASK button again to return to the input signal
screen.
■
You can also exit the blank screen by pressing any button on the control
panel or on the remote control, except the MASK button on the remote
control.
■
The sound will not be muted when the blank screen is displayed.
■ While in “Black Screen” mode no signal will be recognized. To initialize
the projector “Black Screen” mode must be turned off by pressing the
button.
Blank screen
N o t e
Remote control
Remote control