9
English
B
ASIC
OPERA
TIONS
⑦
To connect a PC with the USB cable.
Connect the supplied USB cable to the [
USB
] terminal on the rear panel.
⑧
To connect the AC adapter.
Before inserting the AC adapter in an outlet, connect the DC plug of the supplied AC adapter to the
[
DC IN 12V
] terminal on the rear panel.
• If the displayed image is off-center, adjustment of the horizontal and vertical position should be
made from the connected device.
• In some cases, vertical stripes may appear on the display device. This can be reduced by
adjusting the “clock phase” function of the connected device.
• When using a PC with an external output mode, set the PC to the external output mode after
pressing the [
] button on the operating panel.
• We recommend using a USB 2.0 compliant USB cable.
• If you plug into the USB cable with the power on, the PC may not recognize the device.
• Depending on the PC's USB environment or the peripheral equipment using the USB 2.0
compliant cable, image transfer may be disrupted.
• Operation is not guaranteed for all environments.
• The same image is output to [RGB OUT] and [HDMI OUT].
• When the HDMI monitor is connected, the output image (resolution) is automatically changed based
on information from the connected monitor. Even if [RGB OUT] is selected, it is not reflected.
• Change the output image (resolution) from the OSD menu.
• When changing the output image, make sure to set the output image to camera image and
hide all menus beforehand. We do not guarantee proper operation when the output image was
changed in any condition other than specified above.
N o t e