background image

113

113

OPERA

T

ION OF THIS 

CAMERA

ENGLISH

The following procedures show how to operate the buttons for setting and
operating the Camera from the OSD. For the details of the setting and
operation, refer to OSD (On Screen Display) (P.97).

1.

Go to the icon to be operated or set by using the [

] buttons on

the front operating panel or wireless remote control.

2.

Fix the selected operation or setting by using the [MENU/ENTER]
button on the front operating panel or wireless remote control.

1.

Move the cursor to any item for selection by using the [

] buttons

on the front operating panel or wireless remote control.

2.

Fix the selected item by using the [MENU/ENTER] button on the front
operating panel or wireless remote control.

Basic Operation of OSD

For Selecting and Deciding Icon

For Selecting and Deciding Item

[MENU/ENTER]

[MENU/ENTER]

δΗϋ

δΗϋ

[MENU/ENTER] button

[MENU/ENTER]

[MENU/ENTER]

δΗϋ

δΗϋ

[MENU/ENTER] button

To return the display of the OSD 
menu to the previous one

[

ȁ

] button

[

]

δΗϋ

δΗϋ

[

ȁ

] button

[

ȁ

] button

[

]

δΗϋ

δΗϋ

[

ȁ

] button

[

ȁ

] button

[

ȁ

] button

[

]

δΗϋ

δΗϋ

[

ȁ

] button

[

]

δΗϋ

δΗϋ

[

ȁ

] button

Front operating panel

Wireless remote control

Front operating panel

Wireless remote control

To fix the selected item

To move down 
the cursor

΃ȜΕσͬ

΃ȜΕσͬ
ષ֊൲

ષ֊൲

To move up 
the cursor

To fix the selected item

To move down 
the cursor

΃ȜΕσͬષ֊൲

΃ȜΕσͬષ֊൲

To move up 
the cursor

To return the display of the OSD 
menu to the previous one

Selection

 item

AUTO

ONE-PUSH

MANUAL

To display the

 icon when

 it is selected

書画カメラ P30S.book  113 ページ  2008年1月24日 木曜日 午後6時38分

Содержание Document Camera P30S















































































Отзывы: