Product Description
© Elma Schmidbauer GmbH
BA_Elmasteam_8_Vers.07.2016
23
3.6.5
Programme Selection
INFORMATION
Rotary knob for programme selection.
Simple utilisation: Turn the rotary knob to select the
function and press the rotary knob to confirm the
selection.
The selected programme lights up as blue on the
display segment (point).
The device is pre-set to the factory settings (Table
Chapter 6.4.6.1 Settings).
The device automatically changes after the expiry of the
set time to lock (Figure 3.6.5-D).
Figure 3.6.5: Rotary knob, programme selection
steam outlet
to drain the residual pressure in the pressure vessel
(before opening the pressure vessel screw cap). Steam can be
discharged through the handpiece or fixed nozzle (Chapter 6.4.1)
soft
for the pressure range 4-6 bar. The adjusted operating
pressure on the gauge illuminates as green until the pressure has
been built up/reduced. The pressure achieved illuminates as green
on the gauge.
strong
for the pressure range 6-8 bar. The adjusted operating
pressure on the gauge illuminates as green until the pressure has
been built up/reduced. The pressure achieved illuminates as green
on the gauge.
A
B
C
A
B
C
D
E
F
