Appendix 4: Expert Mode
132
BA_Elmasolvex_VA_EN_Vers.05.2018
© Elma Schmidbauer GmbH
17.4
Creating a cleaning program from a copy
In the
Create/Change Programs
display (Fig.
7.2.1.1
) use /
to select
New Program from Copy
, and confirm with .
Use / to select the cleaning program which you want to
copy and modify (e.g.
Standard
).
Confirm your selection with .
Fig. 7.2.2.1
New Program from Copy
display
After you have selected the cleaning program to be copied, the
Program Name
display appears (
Fig. 7.2.2.2
).
The field for the program name initially contains the field for the
program name with a number, such as
_0
. You can change the
name as desired.
To save the program name and continue to specify program
parameters, press .
Fig. 7.2.2.2
Program Name
display
After you enter the program name, the display screen with the
program parameters for
Cleaning
appears (
Fig. 7.2.1.3
).
Selecting a program
for modification
Naming the new
program
Editing program
parameters
